- Rated power of 20kW in 3U
- Maximum operating voltage of 1500V
- Operating modes: CC, CR, CV, CP
- Up to 10 units (200kW) can be operated in parallel
- Equipped with touch panel display
- Pre-charge function
- I-V characteristic function
- Sequence function
- LAN, USB, RS232C, external analog control (isolated type) standard.
- Regenerative efficiency of over 90% (on-site regeneration)
- Operating voltage: 10V to 1000V (Min. 1.5V)
- Power capacity: 1kW/2kW/4kW/12kW/20kW, 5 models
- 100kW/2000A with parallel operation (Max. 5 units) Connectable with 5WH series
- LAN (LXI)/USB/RS232C standard digital interface
- Synchronized operation
- Sequence function
- Arbitrary IV characteristic (ARB) mode
- Data-logging: voltage/current/power measurements
- Connecting up to 4 booster (PLZ2405WB) units with the master (PLZ1205W) increases the maximum system capability to 10.8 kW 2160 A. The optional parallel cable (PC01-PLZ-5W) is required to connect between the master and slave/booster units.
- Operating voltage: 1.5 to 150 V
- Current: 400 A
- Power: 2000 W
- Input power supply voltage range: 100 to 240 VAC (90 to 250 VAC), single-phase connection
- Power consumption: Max. 200 VA
- Dimensions: 429.5 (455) mm W × 128 (150) mm H × 550 (600) mm D
- Weight: Approx. 23 kg
- Full-Load Current of 100 A at 0.3 V!Possible to operate as low as 50 mV of the input voltage
- Realize the fast slew rate of 50 A/μs at 2.3 V of the load input terminal voltage
- Current setting resolution: 50 μA
- 6 operation modes (CC, CR, CV, CP, CC+CV, CR + CV)
- Equipped with Sequence function and Switching function
- Elapsed Time Display function and Auto Load-Off Timer function are convenient for the discharge tests of batteries
- Available for input voltage range 100 Vac to 240 Vac
- Optional Low Inductance cables are available exclusively for PLZ-4WL series
- GPIB/RS232C/USB are standard interface
- Slew rate of 2.4A/μs in the rising and falling edges in CC mode
- Built-in three ranges; voltmeter, ammeter, and wattmeter
functions that provide readings of up to five digits
- The current slew rate can be changed continuously in
constant current and constant resistance modess
- Supports 0-V input – an indispensable feature for testing
single-cell fuel cells
- Individual units (channels) can operate either independently
or in synchronization
- Up to 5 load units of the same model can be operated in parallel.
- Up to three values can be stored in memory for each most
frequently used operation mode and range
- GPIB/RS232C are standard interface
- External control is available to turn on or off the output
