- Bidirectional High-Capacity DC Power Supply
- High power density: 20 kW in 3U size
- A single unit handles both power and regeneration
- Rated output voltage 50 V/ 500 V/ 1000 V/ 1500 V
- Select a model with an input voltage from 200 Vac (3-phase) or 400 Vac (3-phase)
- Continuous operation at rated power at ambient temperature of 50°C(Excluding some models)
- Up to 10 units (200 kW) can be operated in parallel
- Equipped with touch panel display
- LAN, USB, RS232C, external analog control (isolated type) standard
- Regenerative function (on-site)
- External control I/O is standard for both NPN and PNP type PLCs
- Maximum 20 kW output in a 3U size
- Supports a maximum voltage of 1500 V
- Select input voltage from 200 Vac (3-phase) or 400 Vac (3-phase)
- Bleeder ON/OFF function
- Output ON/OFF delay function
- One-control parallel operation function (up to 10 units of the same model)
- Touch panel for intuitive operation
- LAN, USB, RS232C, external analog control (isolated type) standard
- Sequence function(supports triggered synchronization)
- Variable internal resistance function
- LAN (LXI compliant) /USB/RS232C as standard interface
- A virtual multi-channel bus (VMCB) function makes multichannel
operation more efficient
- A wide range of voltage and current settings can be combined
within its output power rating
- All models are equipped with front-facing output terminals as
standard
- All models are equipped with front-facing output terminals as
standard
- Supporting universal input voltage
- CONFIG setting shortcut function and display
- Setting preset memory function
- Bleeder (sink) can be turned ON/OFF, with an even stronger
bleeder mode setting available
- Output ON/OFF delay function
- Soft start/stop function
- Operating temperature guaranteed up to 50 °C (122 °F).
(Storage temperature is -25 °C to +60 °C (-13 °F to 140 °F).)
- 2U bench-top type
- Palm-sized, portable power supply
- Output power: 200W/400W/600W/800W 4models
- Output voltage: 10V to 650V 8models
- USB/RS232C/RS485 as standard interface (*LAN is a factory option)
- 64 models total (LAN model included)
- A next-generation, internet-enabled rack mounted power supply
- A virtual multi-channel bus (VMCB) function that fully supports multi-channel operation
- A thin and lightweight design with 1U height for increased rack-mounting efficiency
- Voltage and current range can be varied within the rated power (the ratio of 3 times)
- Rated output power: 750 W/1500 W. Rated output voltage: 30 V/80 V/230 V/650 V
- PFC circuit of 0.99 (with 100 V) or 0.97 (with 200 V) at full load
- LAN/USB/RS232C as standard interface
- 8 kW type (13 models*) and 4 kW type (4 models): 17 models in total.
- PAT-T Series Smart Rack System 200 V/400 V Input Type: 164 models in total.
- Ambient temperature of 50°C under full load continuous operation (Smart Rack System: 40°C)
- Parallel operation up to five units for increased power. (40 kW)
- Equipped with power factor correction circuit.
- High noise resistance.
- RS232C standard digital interface.
- USB, GPIB, and LAN optional digital interfaces.
- LXI compliant LAN communication interface.
- Series regulator system with excellent noise performance
- High setting resolution – Voltage: 1 mV, Current: 0.1 mA (PMX18-2A)
- Wide range of output variations (9 models are available)
- LAN (LXI compliant) / USB / RS232C as standard interface
- External analog remote control
- Monitoring and status signal output
- CV, CC priority start function (to prevent overshoot when the output is ON)
- Remote sensing function (18V, 35V models)
- Key lock, 3-point preset memory function
- Three models with 2, 3 and 4 outputs
- Each output is isolated
- High setting resolution (Voltage: 1 mV, Current: 0.1 mA)
- Tracking control in all channels
- Simultaneous display of all channel statuses
- ON/OFF delay of each output
- Simple series/parallel connection between channels (CH1 & CH2)
- LAN (LXI Compliant)/USB/RS232C standard interface
- Turning output on and off using an external contact
- 0V to 600V DC, 0A to 50A, 28models
- Low noise and highly stable output achieved using the series regulation system
- Basic DC power supplies, superior for general-purpose use.
- Use large LED monitor with high visibility for 4 digits display
- Output and Set Switch
- Putting together of the mode setting switches
- OCP (Over Current Protection circuit)
- Output Monitoring
- Control Terminals
- Waveform generation function
- Low ripple noise
- Synchronized operation function(Trigger-based, Clock-based)
- Sequence function
- Unipolar mode
- High-speed response 100 kHz (CV)
- Parallel operation function (Applied to the same model for 2 units, the PBZ-SR Series for 3 to 5 units in parallel connection)
